Stabilization in three-dimensional chemotaxis-growth model with indirect attractant production

This paper deals with the chemotaxis-growth system: $u_t=\mathrm{\Delta }u?\mathrm{?}?(u\mathrm{?}v)+\mu u(1?u)$, $v_t=\mathrm{\Delta }v?v+w$, $\tau w_t+\delta w=u$ in a smooth bounded domain $\mathrm{\Omega }?{\mathbb{R}}^3$ with zero-flux boundary conditions, where μ, δ, and τ are given positive parameters. It is shown that the solution $(u,v,w)$ exponentially stabilizes to the constant stationary solution $(1,\frac{1}{\delta },\frac{1}{\delta })$ in the norm of $L^{\infty }(\mathrm{\Omega })$ as $t\to \infty$ provided that $\mu >0$ and any given nonnegative and suitably smooth initial data $(u_0,v_0,w_0)$ fulfills $u_0?0$, which extends the condition $\mu >\frac{1}{8{\delta }^2}$ in [8].     

Lysosome‐targeted potent half‐sandwich iridium(III) α‐diimine antitumor complexes

Fifteen organometallic Ir(III) half‐sandwich complexes ( 1A – 5C ) having the general formula [(η⁵‐Cp^x)Ir(N^N)Cl]PF₆ (Cp^x = Cp*, tetramethyl(phenyl)cyclopentadienyl (Cp^xph) or tetramethyl(biphenyl)cyclopentadienyl (Cp^xbiph); N^N = diamine) have been synthesized and characterized. The molecular structure of 1A was determined using single‐crystal X‐ray diffraction analysis. The hydrolysis of 1A – 5C was monitored using UV–visible spectra. Complexes 3A – 3C showed catalytic activity for the oxidation of NADH to NAD⁺, where 3C showed the highest turnover number of 29.9 within 450 min. Cytotoxicity examination by MTT assay was carried out against two human cancer cell lines (HeLa and A549) after 24 or 48 h drug treatment. The complexes showed high potency, where the most potent complex ( 3C ; IC₅₀ = 3.4 μM) was six times more active than cisplatin against A549 cells after 24 h drug exposure. Cytotoxic potency towards A549 cells increased with phenyl substitution on Cp ring: Cp^xbiph > Cp^xph > Cp*. In addition, the biological studies showed that 3C caused cell apoptosis and cell cycle arrest at G₁ phase in A549 cancer cells. Moreover, 3C increased the level of reactive oxygen species markedly after 24 h, which may provide an important basis for killing cancer cells. Confocal laser scanning microscopy was used to track 3C in A549 cells. The cellular localization experiment showed that 3C targeted lysosomes and caused lysosomal damage.     

Recent Progress in the Electrolytes of Aqueous Zinc-Ion Batteries

Rechargeable aqueous zinc-ion batteries (ZIBs) have garnered tremendous attention in the field of next energy storage devices due to their high safety, low cost, abundant resources, and eco-friendliness. As an important component of the zinc-ion battery, the electrolyte plays a vital role in the electrochemical properties, since it will provide a pathway for the migrations of the zinc ions between the cathode and anode, and determine the ionic conductivity, electrochemically stable potential window, and reaction mechanism. In this Minireview, a brief introduction of electrochemical principles of the aqueous ZIBs is discussed and the recent advances of various aqueous electrolytes for ZIBs, including liquid, gel, and multifunctional hydrogel electrolytes are also summarized. Furthermore, the remaining challenges and future directions of electrolytes in aqueous ZIBs are also discussed, which could provide clues for the following development.     

Nukiangendines A and B,two novel 13,14-seco-abietanes from Abies nukiangensis

From Abies nukiangensis, two novel 13,14-seco-abietane diterpenes, nukiangendines A (1) and B (2) were isolated. Their relative structures were determined by extensive NMR and HRMS spectroscopic analysis. The absolute configuration of 1 was established by ECD calculations. Compound 1 showed significant anti-hepatitis C virus (HCV) effects.     

Precise Synthesis of Poly(thioester)s with Diverse Structures by Copolymerization of Cyclic Thioanhydrides and Episulfides Mediated by Organic Ammonium Salts

The precise synthesis of poly(thioester)s with diverse structures is still a significant challenge in the polymeric materials field. Herein, we report a novel approach to the synthesis of well‐defined poly(thioester)s by the controlled alternating copolymerization of cyclic thioanhydrides and episulfides induced by simple organic ammonium salts. Both the cation and anion have strong effects on the copolymerization. [PPN]OAc ([PPN]=bis(triphenylphosphine)iminium) with a bulky cation was proven to be efficient in initiating this polymerization, yielding poly(thioester)s with a completely alternating structure, controlled molecular weight, and narrow polydispersity. The poly(thioester) obtained from succinic thioanhydride and propylene sulfide is a typical semicrystalline material, possessing a high refractive index of up to 1.78. Because it uses readily available monomers, this method is expected to open up a new route to poly(thioester)s with diverse structures and properties.     

Thermal evaluation of a heat pipe working with n-pentane-acetone and n-pentane-methanol binary mixtures

Journal of Thermal Analysis and Calorimetry - In the present study, a set of experiments were accomplished to appraise the thermal performance and heat transfer of n-pentane-acetone and...     

Approaching the Integer‐Charge Transfer Regime in Molecularly Doped Oligothiophenes by Efficient Decarboxylative Cross‐Coupling

A library of symmetrical linear oligothiophene was prepared employing decarboxylative cross‐coupling reaction as the key transformation. Thiophene potassium carboxylate salts were used as cross‐coupling partners without the need of co‐catalyst, base, or additives. This method demonstrates complete chemoselectivity and is a comprehensive greener approach compared to the existing methods. The modularity of this approach is demonstrated with the preparation of discreet oligothiophenes with up to 10 thiophene repeat units. Symmetrical oligothiophenes are prototypical organic semiconductors where their molecular electrical doping as a function of the chain length can be assessed spectroscopically. An oligothiophene critical length for integer charge transfer was observed to be 10 thiophene units, highlighting the potential use of discrete oligothiophenes as doped conduction or injection layers in organic electronics applications.     

Dynamical analysis of age-structured pertussis model with covert infection

An age-structured pertussis model with covert infection is proposed to understand the effect of covert infection on the recurrence of pertussis. It is found that vaccination only for young children does not have a decisive effect on whooping cough control. It is shown that although the vaccine coverage rate is relatively high, the model has a backward bifurcation for a larger covert infection rate. In addition, sufficient conditions for the disease-free steady state to be globally asymptotically stable are obtained.     

SCR performance enhancement of NiMnTi mixed oxides catalysts by regulating assembling methods of LDHs-Based precursor

A series of NiMnTi mixed metal oxides (Ni/Mn-TiO₂, Mn/NiTi-LDO and TiO₂/NiMn-LDO, NiMnTi-LDO) were synthesized via different assembling methods and evaluated in the selective catalytic reduction of NO_x with NH₃(NH₃-SCR). As the results presented, catalysts via diverse assembling methods of LDHs templates afforded different catalytic denitrification (DeNO_x) performance, which might be related to the exposure degree of active constituents and the interaction intensity between metal components. Noticeably, compared with Ni/Mn-TiO₂, Mn/NiTi-LDO and TiO₂/NiMn-LDO catalysts, the NiMnTi-LDO catalyst deriving from one step in-situ method NiMnTi-LDH precursor template exhibited the most desirable performance at temperature window of 150–360 °C in NH₃-SCR (above 90% NO_x conversion with 95% N₂ selectivity). The specific structure and property of samples were correlated by means of a series of characterizations, where the results indicated that NiMnTi-LDO possessed the highest surface area, the strongest redox ability, the most abundant acid amount and the best dispersion.     

Optimization of an Alkaline Hydrolysis Preparation of Capilliposide-A from Lysimachia capillipes Hemsl. Using Response Surface Methodology Coupled with HPLC-ELSD Analysis

Capilliposide-A, a rare secondary saponin found in Lysimachia capillipes, has been reported to exhibit good biological activities. However, it is difficult to obtain a sufficient of capilliposide-A for further research through column chromatography and chemical synthesis. The aim of this work was to establish an efficient approach for the convenient preparation of this steroid saponin based on alkaline hydrolysis. The hydrolysis conditions were optimized by response surface methodology after a preliminary investigation of the affecting factors by single-factor experiments. Under the optimal conditions, the macroporous resin that adsorbed capilliposide-B and capilliposide-C was hydrolyzed in an 8% (w/v) NaOH solution at 35 °C for 65 h, and the yield of capilliposide-A was 68.90%. The results demonstrated that this newly developed approach is efficient for the preparation of capilliposide-A, and this approach is also crucial for further development and clinical applications.